Buying well

How to vet a security installer before you sign

Twenty questions that separate a real security installer from a salesperson — certification, site assessment, handover, passwords, warranty and what year two costs.

Reviewed by Werner Biljon 8 min read
An installer’s toolbag and checklist on a boundary wall at golden hour

Security is one of the few purchases where you cannot inspect the product before you need it. The system either works on the night it matters or it does not, and by then the decision is years old. That makes the choice of installer more consequential than the choice of brand — and it is a choice you can make well with about twenty questions.

The short version

  • Ask who will physically be on site. On many jobs the person quoting is not the person installing.
  • A quote without a site visit prices a guess about your cable routes.
  • Certification is checkable. Ask for it and check it.
  • Handover is where systems are won or lost: naming, walk-testing, an export test, and documentation.
  • Ask who holds the admin passwords. A system you cannot administer is a system you do not fully own.
01

Who is actually going to be on your property

The most useful question in the whole process is the plainest: who does the work? In a large part of the market, a salesperson quotes and a subcontracted crew installs, sometimes a crew the salesperson has never worked with. That model can produce good results, but it changes where accountability sits, and it changes who you can call when something is wrong in year two.

There is no correct answer here — a big company with in-house teams and a specialist owner-operator are both legitimate. What matters is that you know which you are buying, and that the person who assessed the property is connected to the person who installs it. When those are the same person, the design intent survives to the wall.

  • Is the person quoting the person installing, or supervising the install?
  • Are technicians in-house or subcontracted?
  • Who is my point of contact after handover, and is it the same person?
  • If a fault appears in eighteen months, who comes out?
02

Insist on a site assessment

A firm price given over the phone is a price for an imagined property. The variables that move cost most — cable routes, wall construction, roof access, existing infrastructure, lighting at night, the way the household actually moves through the property — cannot be assessed remotely.

A good assessment is also diagnostic. It should surface things you did not ask about: a gate that is dragging, a beam aimed across a path the dog uses, an existing recorder with spare channels that can be reused, a distribution board with no surge protection. An installer who walks the property and tells you what not to buy is showing you something important.

  1. 01Walk the property together, at the time of day the risk is highest.
  2. 02Ask what they would do first if the budget were half.
  3. 03Ask what existing equipment can be kept and integrated.
  4. 04Ask what they would not install here, and why.
  5. 05Ask them to describe the intended view of each camera before it goes up.

WSN note:The strongest signal in a site visit is an installer talking you out of something. It means they are designing for the property rather than for the invoice.

03

Certification, registration and what each one covers

Different parts of a security installation carry different credentials, and they are not interchangeable. Manufacturer certification on alarm panels — IDS being the most widely installed family in South African homes — indicates the installer has been trained on the equipment they are configuring. Gate automation manufacturers run their own certification, Centurion Systems being the common one locally.

Electric fencing is stricter. Only an installer registered with the Department of Employment and Labour may issue an Electric Fence System Certificate of Compliance, and a general electrical qualification does not cover it. If electric fencing is part of your job, ask for the registration number up front and confirm it appears on the certificate you receive.

For any of these, ask to see the certificate rather than taking the claim. Legitimate installers expect the question and answer it easily.

DisciplineWhat to ask for
Alarm systemsManufacturer certification on the panel family being installed
Gate automationManufacturer certification for the operator brand
Electric fencingDepartment of Employment and Labour installer registration number
CCTVEvidence of comparable installations and a stated design method
All workProof of insurance and a written scope with exclusions
What to ask for, by discipline
04

Reading the quote properly

Comparable totals rarely mean comparable scopes. The differences hide in what is excluded, and exclusions are where disputes are born. A well-written quote names the equipment, states the installation method, and lists what is not included — making good after cabling, trenching, surge protection, backup power, and any builder’s work.

Two clauses deserve particular attention. The first is what happens if the job turns out to be harder than assessed: is there a rate, or is it a renegotiation? The second is the payment schedule. A deposit is normal; a full payment before any work is not.

  • Is every item named, with model numbers, rather than described generically?
  • Is the installation method stated — conduit or clipped, PoE or separate supply?
  • What is explicitly excluded?
  • What is the variation rate if the scope changes?
  • What is the payment schedule, and what triggers the final payment?
05

Handover is the part people forget to buy

The gap between a good installation and a bad one is often entirely in the last two hours. A system handed over properly is one where every zone has a name a person would use, every detector has been walk-tested with you present, every camera has been reviewed for what it actually sees, an export has been performed successfully, and the system time is correct.

That last item sounds trivial and is not. Footage with the wrong timestamp is substantially less useful to an insurer or an investigator, and system clocks drift. Confirm it at handover and check it once a year.

Ask for documentation as a deliverable: the zone list, the camera list with intended coverage, the equipment schedule with model numbers, warranty terms, and the maintenance interval. If a different technician has to work on the system in three years, that document is what stops them guessing.

  1. 01Every zone named in plain language and walk-tested in your presence.
  2. 02Every camera view reviewed on screen against its stated purpose.
  3. 03A real playback and export performed while you watch.
  4. 04System date and time verified.
  5. 05Arming, disarming and stay-mode demonstrated to everyone in the household.
  6. 06Documentation handed over: zones, cameras, equipment, warranties, service interval.
06

Passwords, ownership and lock-in

Ask directly: who holds the administrator credentials, and will I have them? Some installers retain admin access as a matter of policy, which is defensible if you have your own account with the access you need, and is a problem if you do not. A recorder you cannot log into is a recorder you cannot hand to a new technician, a new owner, or an insurer.

The same applies to monitoring contracts and equipment ownership. Find out what happens to the hardware at the end of a contract, and whether the panel can be re-registered to a different monitoring provider. That question is uncomfortable to ask and much more uncomfortable to discover the answer to later.

WSN note:Default recorder passwords are still the most common serious security fault found on residential systems. Change it at handover and know who has the new one.

07

Ask what year two costs

Every security system needs maintenance: batteries, lens cleaning, beam alignment, fence tensioning, firmware, and a periodic walk-test. Most quotes are silent about this, and most systems quietly degrade because of it.

Ask what a service visit costs, how often it is recommended, and whether a maintenance agreement exists. Then ask the question behind it: does the same person who installed it do the servicing? An installer who maintains their own work has an incentive to install it well, and a technician who knows the system because they built it will diagnose it far faster than one meeting it cold.

08

Red flags worth walking away from

None of these are proof of a bad installer on their own. Two or three together are a strong signal.

  • A firm price without seeing the property.
  • Pressure to sign today, or a discount that expires at the end of the visit.
  • No written scope, or a scope with no exclusions listed.
  • Reluctance to provide certification or registration numbers.
  • Full payment demanded before work begins.
  • No handover process described, and no documentation offered.
  • Vagueness about who owns the equipment or holds the passwords.
  • A quote that solves everything with more cameras and nothing else.

Common questions

What certification should a South African alarm installer have?

Manufacturer certification on the panel family they are installing — IDS is the most widely installed in South African homes. For electric fencing, look for registration with the Department of Employment and Labour, which is required to issue a compliance certificate. Ask to see the documents.

Should I get three quotes?

Get at least two, and make them comparable by asking each installer the same questions about method, retention, exclusions and handover. Comparing totals without normalising scope is how people buy the cheapest exclusion list.

Is it a problem if the installer keeps the admin password?

It depends on whether you also have an account with the access you need. If the only administrator credential sits with the installer, you cannot hand the system to anyone else, which is a real form of lock-in.

How often should a security system be serviced?

Annually as a baseline, more often where outdoor detection, electric fencing or a heavily used gate is involved. Ask for the recommended interval in writing at handover.

Keep reading