Why your alarm keeps going off, and how to stop it
The real causes of false alarms in South African homes — batteries, beams, pets, placement and ageing detectors — and a method for fixing them for good.

A false alarm is rarely random. It is a system telling you something true about itself — a flat battery, a drifting beam, a detector aimed at a heat source, a door that no longer closes squarely. The households that solve it are the ones that stop treating each trigger as an isolated annoyance and start reading the pattern.
The short version
- Record which zone triggered and at what time. Two weeks of that log solves most cases.
- Power interruptions are the leading indirect cause: they flatten batteries, which then misbehave.
- Outdoor beams are the single largest source of unnecessary armed-response dispatches.
- Pet immunity is a design constraint, not a setting you switch on afterwards.
- Repeatedly bypassing a noisy zone is how a household quietly ends up unprotected.
The cost is bigger than the call-out fee
Every false alarm has a direct cost in call-out charges, and a much larger indirect one. Response companies in South Africa are consistent about this: because false alarms are so common, the resources available for genuine emergencies are under constant pressure, and outdoor beams are repeatedly named as the prime suspect behind unnecessary dispatches.
The household cost is worse. A system that cries wolf gets partially disarmed. The beam zone is bypassed "just for tonight". The outside PIR is switched off during the windy season. Six months later, the alarm is armed only when the family travels, and the money spent on it is buying nothing.
WSN note:Track how many zones are bypassed on a normal night. That number, not the panel model, tells you how much protection you actually have.
Start with two weeks of evidence
Almost every stubborn false alarm case is solved by data that costs nothing to collect. Before calling anybody, keep a simple log. You are looking for correlation: time of day, weather, whether the power had just returned, whether anybody was home, and which specific zone reported.
Patterns emerge fast. Triggers clustered shortly after power returns point at batteries and supply. Triggers on windy nights point at vegetation or a loosely mounted device. Triggers at dawn and dusk point at thermal transitions across a PIR field. Triggers only when the house is empty and quiet point at rodents or insects.
- 01Note the date, time and zone for every activation, including ones you cancel.
- 02Note the weather and whether power had recently been restored.
- 03Note who was home and what was moving — pets, a fan, a delivery.
- 04After two weeks, group the entries by zone. The worst zone is where you start.
- 05Bring the log to the technician. It converts a two-hour fault find into a twenty-minute one.
Batteries: the cause that hides behind every other cause
Load shedding and unplanned outages punish security batteries in a specific way. Lead-acid batteries used in alarm panels and gate motors are compromised when repeatedly drained below roughly half their charge, and if the interval between outages is too short for a full recharge, they never recover their capacity. Batteries that would ordinarily last three to five years have, through periods of heavy load shedding, been replaced as often as every six months.
A weak battery does not simply die. It sags under load, browns out the panel, and produces exactly the intermittent, unexplained events that get blamed on detectors. Before replacing a single PIR, confirm the battery is healthy and that the charger is doing its job.
The related failure is the surge when supply returns. The inrush damages boards, and a damaged charging circuit then over- or under-charges the battery, which brings you back to the same symptom by a different route.
- Test panel battery voltage under load, not at rest.
- Replace batteries on a schedule rather than on failure.
- Fit surge protection on the supply feeding the panel.
- Confirm the panel reports low battery in a way somebody actually sees.
Beams and outdoor detection
Outdoor detection is the most valuable part of a residential alarm and the most common source of noise. The physics is unforgiving: a beam is a straight line between two points, and anything that interrupts it is an event. Growing vegetation, a swinging branch, a cat on a wall, a spider building across the lens, heavy rain and misalignment from a knock all read the same way to the panel.
The fixes are mostly maintenance rather than equipment. Keep the beam path clear, including seasonal growth that was not there when the system was commissioned. Clean lenses. Check alignment after any work on the wall. And critically, make sure the beam was aimed at a route somebody must cross rather than along a path the household uses casually.
Where a beam genuinely cannot be made reliable, outdoor PIRs designed for exterior discrimination are a better tool than an indoor detector pressed into outdoor service — which is a surprisingly common cause of chronic false alarms.
- Trim vegetation off the beam path twice a year, minimum.
- Re-align and clean lenses after storms, painting or wall work.
- Aim outdoor PIRs away from driveways with turning vehicles, aircon units and reflective surfaces.
- Report the electric fence energiser as its own zone so a genuine fence event is distinguishable.
WSN note:A beam you bypass every windy night is worse than no beam. Fix the placement or replace the device — do not normalise the bypass.
Pets, rodents and insects
Pet-immune passive infrared detectors work by discriminating mass and movement pattern, and they materially reduce false activations from dogs and cats. They are not foolproof, and the reason is usually installation rather than the device: a pet-immune PIR mounted at the wrong height, or aimed across furniture a cat can climb, loses the geometry it depends on.
Rodents and insects are a different problem. An insect crossing the lens at close range looks like a large body at distance. A spider web collecting dust in front of a lens produces triggers with no visible cause at all. Technicians in South Africa have long used a mothball placed on top of a detector to deter pests — an unglamorous trick that works.
The design conclusion is simple: if the household has animals, that has to shape detector selection, mounting height and coverage before installation, not after the first month of complaints.
Doors, windows and human error
A significant share of false alarms are not the system misbehaving at all. Doors and windows that are not fully secured, a sliding door that has dropped on its rollers, a gate that no longer closes squarely, a family member who arms and then remembers something — these produce genuine detections of a real event that simply was not a break-in.
The fix is partly mechanical and partly procedural. Get the door hardware right so that "closed" is unambiguous. Then make arming a habit that works for the household: a single arming point everybody uses, clear stay-mode behaviour so the alarm can be live while people sleep, and a code discipline that does not depend on anyone remembering an eight-digit sequence at 22:00.
- Fix the mechanical cause first — a dropped sliding door will keep producing events.
- Make stay-mode explicit so the system can be armed while occupied.
- Reduce the number of ways to arm, and make the primary one obvious.
- Re-walk-test after any renovation, new furniture layout or new pet.
When it is the equipment
After batteries, placement, vegetation and doors have been ruled out, ageing equipment is the remaining explanation. Detectors drift. Panels develop intermittent faults on specific zones. Cable that has been baked in a roof void for fifteen years develops resistance and intermittent contact. Wireless devices lose signal margin as batteries decline and as furniture and building work change the radio path.
A technician who is handed a two-week log will normally find this quickly, because intermittent faults reveal themselves as patterns rather than as a single reproducible test. That is the strongest argument for keeping the log: it converts an expensive fault-finding exercise into a targeted repair.
WSN note:A system that has been noisy for years is not unlucky. It is unmaintained. It is almost always fixable, and it is almost never fixed by adding another detector.
Common questions
What are the most common causes of false alarms?
Faulty or ageing equipment, human error, flat batteries following power interruptions, doors and windows not properly secured, incorrect installation, and pets, rodents or insects. Most are design or maintenance issues rather than bad luck.
Do pet-friendly detectors actually work?
They meaningfully reduce activations caused by dogs and cats, but they are not foolproof and they depend on correct mounting height and aim. Pet immunity has to be part of the design, not a setting applied afterwards.
Why does my beam trigger when it rains?
Heavy rain, mist and the debris rain dislodges can all interrupt the beam path. Persistent rain triggers usually point to alignment, lens contamination or a path that is too long or too exposed for the device fitted.
Should I just bypass the zone that keeps triggering?
Only as a short-term measure while a fault is being fixed. A permanently bypassed zone is an unprotected area that the household has stopped thinking about, which is the most expensive outcome of a false alarm problem.